SHOWA DENKI EM-H22

Giá	:	Liên hệ
Tình trạng	:	AVAILABLE
Mã sản phẩm	:
Nhà cung cấp	:	TOAN THINH PHAT Corporation
Dịch vũ hỗ trợ	:	Đang cập nhật

Standard type model												Heat-resistance type model
Impeller	Model	Outlet flange diameter (mm)	Phase	Output (kW)	50Hz			60Hz			Highest intake temperature	Highest intake temperature
Impeller	Model	Outlet flange diameter (mm)	Phase	Output (kW)	Revolutions (min-1)	Max air flow ( m³/min)	Max static pressure (KPa)	Revolutions (min-1)	Max air flow ( m³/min)	Max static pressure (KPa)	Highest intake temperature	Highest intake temperature
Turbo	EC-63S	63	single	0.1	2800	4.5	0.60	3400	5.5	0.85	60°C	250°C
	EC-63T	63	3	0.1	2800	4.5	0.60	3400	5.5	0.85	60°C	250°C
	EC-75S	75	single	0.2	2800	6.5	0.80	3400	7.5	1.15	60°C	250°C
	EC-75T	75	3	0.2	2800	6.5	0.80	3400	7.5	1.15	60°C	250°C
	EC-04S	97	single	0.4	2850	13	1.32	3450	16	1.91	60°C	250°C
	EC-H04	97	3	0.4	2900	13.5	1.30	3450	16	1.90	60°C	250°C
	EC-H07	123	3	0.75	2900	21	1.40	3450	25	2.00	60°C	250°C
	EC-H10	123	3	1.0	2900	22	1.65	3450	26.5	2.35	60°C	250°C
	EC-H15	148	3	1.5	2900	30	1.95	3450	34	2.80	60°C	250°C
Plate	EP-63S	63	single	0.1	2800	5.0	0.60	3400	6.0	0.85	60°C	250°C
	EP-63T	63	3	0.1	2800	5.0	0.60	3400	6.0	0.85	60°C	250°C
	EP-75S	75	single	0.2	2800	7.0	0.80	3400	8.0	1.15	60°C	250°C
	EP-75T	75	3	0.2	2800	7.0	0.80	3400	8.0	1.15	60°C	250°C
	EP-04S	97	single	0.4	2850	13.5	1.18	3450	16	1.67	60°C	250°C
	EP-H04	97	3	0.4	2900	12.5	1.15	3450	15	1.65	60°C	250°C
	EP-H07	123	3	0.75	2900	22	1.20	3450	19.5(26)	1.75	60°C	250°C
	EP-H10	123	3	1.0	2900	22.5	1.45	3450	24(26)	2.10	60°C	250°C
	EP-H15	148	3	1.5	2900	29	1.65	3450	30(34)	2.35	60°C	250°C
Sirocco	EM-H07	97	3	0.75	2900	17	1.25	3450	16(19)	1.80	60°C	250°C
Sirocco	EM-H22	123	3	2.2	2900	32	1.65	3450	31(36)	2.40	60°C	250°C

The number in ( ) indicates overrated max. airflow.

Easy to install on industrial machinery and equipment and easy to use, E series is an electric blower developed for various purposes. This high quality product is designed to be capable of continuous stable operation up to 60°C and prevents water vapor and small dust particles from invading the bearing.
Caution:If the intake temperature is above 60°C, please use the heat-resistant.
type model (HT model)