SHOWA DENKI AH-H04

Giá	:	Liên hệ
Tình trạng	:	AVAILABLE
Mã sản phẩm	:
Nhà cung cấp	:	TOAN THINH PHAT Corporation
Dịch vũ hỗ trợ	:	Đang cập nhật

Standard type model												Heat-resistance type model
Impeller	Model	Outlet flange diameter (mm)	Phase	Output (kW)	50Hz			60Hz			Highest intake temperature	Highest intake temperature
Impeller	Model	Outlet flange diameter (mm)	Phase	Output (kW)	Revolutions (min-1)	Max air flow (m³/min)	Max static pressure (kPa)	Revolutions (min-1)	Max air flow (m³/min)	Max static pressure (kPa)	Highest intake temperature	Highest intake temperature
Air foil	AH-400	97	3	0.2	2800	9.5	0.75	3400	11	1.05	40°C	200°C
	AH-H04	123	3	0.4	2900	22	1.00	3450	26	1.45	40°C	200°C
	AH-H07	144 ×144	3	0.75	2900	33	1.25	3450	41	1.80	40°C	250°C
	AH-H10	160 ×160	3	1.0	2900	42	1.30	3450	50	1.90	40°C	250°C
	AH-H15	180 ×180	3	1.5	2900	58	1.45	3450	71	2.05	40°C	250°C
	AH-H22	210 ×210	3	2.2	2900	74	1.60	3450	86	2.30	40°C	250°C
	AH-H37	240 ×240	3	3.7	2900	100	2.15	3450	120	3.10	40°C	250°C

The number in ( ) indicates overrated max. airflow.

AH Series are low noise type which meets current demands. The noise is 5～7dB lower and the efficiency is 10% higher compared to the turbofans with the same performance.
Notice:If the intake temperature is above 40°C, please use the heat-resistant type model (HT model).

Purposes


Incinerators Driers Printing machines Burners Laundry machinery	Hot blast generating machines Plastic pressing machines Confectionery machines Medical devices Cooling equipment, general ventilation